Featuring Emerson’s award-winning and patented SmartSet technology, the CKS1708 clock radio automatically sets itself on the first use to the correct year, month, date, day, and time. This clock features a USB port for charging iPhones, iPads, iPods, Androids and Tablets.
- Dual Alarm AM/FM Clock Radio with SmartSet ® Automatic Time Setting System (U.S. 6,567,344) OWNER’S MANUAL CKS2235 Visit our web site at www.emersonradio.com CKS2235032106. Page 2 CAUT I ON TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES.
- Manual For Emerson Research Alert Clock Radio User Emerson DirectSet Alarm Clock Radio Emerson CK5748 Smart Effects Technoline WT 189 DCF-77 Radio Controlled Clock with Manual Setting Option. New listing emerson research clock radio. $5.00, 0 bids Emerson Radio Ckw2000 Dual Alarm Clock Radio w/ NOAA/same Weather Alert System.
Important safety instructions, Dual alarm am/fm clock radio with smartset, Automatic time setting system
Dual Alarm AM/FM Clock Radio
With SmartSet
®
Automatic Time Setting System,
(U.S. Patent No. 6,567,344)
OWNER’S MANUAL
CKS1704BK / CKS1704SL
Visit our web site at www.emersonradio.com
WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED
TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
The lightning flash with arrowhead
symbol, within an equilateral triangle
is intended to alert the user to the
presence of uninsulated ‘dangerous
voltage’ within the product’s enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
WARNING: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK), NO USER
SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION: Use of controls or adjustments, performance of procedures other than those specified
may result in hazardous radiation exposure.
The Caution Marking is located at the bottom of the apparatus.
Les précautions d’emploi sont inscrites en bas de l’appareil.
IMPORTANT SAFETY INSTRUCTIONS
1.) Read these instructions. Keep these instructions. Follow these instructions. Heed all
warnings.
2.) Do not use this apparatus near water.
3.) Clean only with dry cloth.
4.) Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
5.) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
6.) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug had two blades and a
third grounding prong. The wide blade or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
7.) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
8.) Only use attachments/ accessories specified by manufacturer.
9.) Unplug this apparatus during lightning storms or when unused for long periods of time.
10.) Refer all servicing to qualified service personal. Servicing is required when the apparatus
have been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
11.) Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus combination to avoid injury from
tip-over.
12.) The apparatus shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on apparatus.
L’appqreil ne doit pas être exposé aux écoulements ou éclaboussures et aucun objet ne
contenant de liquide, tel qu’un vase, ne doit être placé sur l’objet.
13.) Main plug is used as disconnect device and it should remain readily operable during
intended use. In order to disconnect the apparatus from the main outlet completely, the main
plug should be disconnected from the main outlet completely.
La prise du secteur ne doit pas être obstruée ou doit être facilement accessible pendant son
utilisation. Pour être complètement déconnecté de l’alimenttation d’entrée, la prise doit être
débranchée du secteur.
14.) Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
Les piles ne doivent pas être exposées à de forte chaleur, tel qu’à la lumière du soleil, au feu
ou autres choses de semblable
.
15.) The marking information is located at the bottom of apparatus.
Les marquages sont inscrits en bas de l’appqreil.
NOTE:
- Minimum distance 10cm around the apparatus for sufficient ventilations.
10cm de distance minimale autour de l’appareil pour une ventilation suffisante.
- The ventilation should not be impeded by covering the ventilation opening with items such as
Newspaper, table-clothes, curtain etc.
Ne pas recouvrir les entrées d’aérations avec des objets tel qu’un journal, une nappe, un
rideau etc.
- No naked flame sources such as lighted candles should be placed on the apparatus.
Aycune source de flamme nue, tel qu’une bougie, ne doit être placée sur l’appareil.
- Attention should be drawn to the environmental aspects of battery disposal.
Les piles usages doivent être jetées en respectant l’environnement.
- The use of apparatus in moderate climates.
L’utilisation de l’appareil dans un climat tropical et/ou modéré.
Before We Begin
Thank you for purchasing this Emerson SmartSet
®
Dual Alarm Clock Radio.
This clock radio uses Emerson’s patented SmartSet
®
Automatic Time Setting System. The first
time you connect this clock radio to your AC outlet, and after every power interruption, within
seconds the clock will automatically set itself to the correct Year, Month, Date, Day, and Time. In
addition all changes from Standard Time to Daylight Saving Time, and back to Standard Time, are
made automatically.
There are dual alarms that can be set and used independently, both of the alarms can be
programmed for everyday operation, weekdays only, or weekends only.
There is a long life lithium battery installed in this clock radio when you buy it. This battery can
maintain the time and alarm setting for 3 to 5 years, or even longer,
We have taken every precaution to make sure this radio was in perfect working order when it left
our factory. If you encounter any problems with the set up or operation of this item, please call the
Emerson Consumer Products Corp., Customer Service Hotline, toll free, at
1-800-898-9020.
IMPORTANT NOTES
Avoid installing this unit in places
exposed to direct sunlight or close to
heat radiating appliances such as
electric heaters, on top of other stereo
equipment that radiates too much heat,
places lacking ventilation or dusty areas,
places subject to constant vibration
and/or humid or moist areas.
described in the manual.
r, make
certain that the AC power cord is
properly installed.
disconnect the AC power cord.
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/ TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
PREPARATION FOR USE
Unpacking and set up
Remove the radio from the carton and remove all packing material from the radio. We
suggest that you save the packing material, if possible, in the unlikely event that your radio
ever needs to be returned for service. The original carton and packing material is the only
safe way to pack your radio to protect it from damage in transit.
Remove any descriptive labels or stickers on the front or top of the cabinet. Do not remove
any labels or stickers from the back or bottom of the cabinet.
Note the serial number on the bottom of your radio and write this number in the space
provided on the Warranty page of this manual.
Place your radio on a level surface such as a table, desk or shelf, convenient to an AC outlet,
out of direct sunlight, and away from sources of excess heat, dirt, dust, moisture, humidity, or
vibration.
Unwind the AC power cord and extend it to its full length. The FM antenna is built in to this
cord. It must be fully extended to provide the best FM reception.
When moving the set, be sure to first
Before turning on the powe
Operate controls and switches as
Protect Your Furniture
This model is equipment with non-skid rubber ‘feet’ to prevent the product from moving when you
operate the controls. These ‘feet’ are made non-migrating rubber material specially formulated to
avoid leaving any marks or stains on your furniture. However certain types of oil based furniture
polishes, wood preservatives, or cleaning sprays may cause the rubber ‘feet’ to soften, and leave
marks or a rubber residue on the furniture. To prevent any damage to your furniture we strongly
recommend that you purchase small self-adhesive felt pads, available at hardware store and
home improvement centers everywhere, and apply these pads to the bottom of the rubber ‘feet’
before you place the product on fine wooden furniture.
Power Source
This radio designed to operate on normal 120V 60Hz AC power only. Do not attempt to operate
the radio on any other power source. You could cause damage to the radio that is not covered by
your warranty.
This radio should be connected to an AC outlet that is always ‘live’. Do
not connect it to an outlet that is controlled by a wall switch. When the
power to the radio is interrupted, the built in lithium battery takes over to
maintain the time and alarm settings. To maximize the life of the lithium
battery keep the radio connected to a ‘live’ AC outlet at all times.
You will note that this system is equipped with a polarized AC power plug
having one blade wider than the other. This is a safety feature. If this
plug does not fit into your existing AC outlet, do not try to defeat this safety feature by filing the
wide blade to make it fit into your outlet.
If this plug will not fit into your outlet, you probably have an out-dated non-polarized AC outlet. You
should have your outlet changed by a qualified licensed electrician.
Sure Alarm battery Back-Up System
This SmartSet
®
Clock Radio includes a Sure Alarm battery back-up circuit that can wake you up
even if the power is ‘off’ at the selected wake up time. If your power is ‘off’ at the selected wake up
time the clock display will be off and the radio will not operate, but a separate mini-buzzer will turn
‘on’ automatically to wake you up, even if you had selected the “ Wake to Radio” option.
The Sure Alarm will sound for 30 seconds and then shut off automatically.
To stop the Sure Alarm buzzer immediately, press the
RADIO ON/OFF button.
Press the
SNOOZE button has no effect during Sure Alarm operation.
NOTE: In order to maximize the life of the built in lithium battery, please be sure to set the ALARM
1 and ALARM 2 switches to the ‘OFF’ position if the radio will be disconnected from the AC outlet
for more than a few hours. This will prevent the Sure Alarm from turning ‘On’ unnecessarily.
LOCATION OF CONTROLS AND INDICATORS
1) AC Power Cord (Back Cabinet)
2)
MONTH/DATE Button
3)
ALARM 1 (OFF/RADIO/BUZZ)
Selector Switch
4)
Sleep Button
5)
ALARM 2 (OFF/RADIO/BUZZ)
Selector Switch
6)
TIME Button
7)
TIME ZONE Button
8)
SET + / – Button
9)
Alarm 2 Button
10)
RADIO ON/OFF Button
11)
SNOOZE Button
12)
Alarm 1 Button
13)
Time Display
14)
AM Indicator
15)
ALARM 1 Indicator
16)
ALARM 2 Indicator
17)
BATTERY LOW Indicator
18)
VOLUME Control
19) The Lithium Battery Compartment
20)
BAND (AM/FM) Selector Switch
21)
TUNING CONTROL
Emerson Clock Radio Instructions
OPERATING INSTRUCTIONS
Setting The Time, The First Time
IMPORTANT: The first time you connect your new SmartSet
®
clock radio to the AC outlet the
internal computer will automatically set the time correctly for the
Eastern Time Zone, which is the
initial default setting. The display will scan for a few seconds and then show the correct Day and
Time in the Eastern zone. If you live in the Eastern Time zone, there is nothing else to do. Your
clock is set correctly and running.
If you do not live in the Eastern Time zone you must change the default zone display to your own
zone. You only do this one time and the SmartSet
®
will remember the new default zone setting and
will always return to that setting after a power interruption.
There are 7 time zones programmed into your SmartSet
®
clock radio as follows:
ZONE 1 -- Atlantic Time
ZONE 2 – Eastern Time (Default setting)
ZONE 3 -- Central Time
ZONE 4 – Mountain Time
ZONE 5 – Pacific Time
ZONE 6 – Yukon Time
ZONE 7 – Hawaiian Time
To change the default time zone display, depress the
TIME ZONE
button. The number “
2” will appear on the display indicating that the
default zone is ZONE 2, Eastern Time.
Hold the
TIME ZONE button and then press either the SET + or – button until your own time zone
appears on the display, then release the buttons. The clock display will change to the correct time
in the time zone you selected. The clock will always return to the correct time in the zone you
selected after every power interruption.
If you move to a different time zone, simply change the default zone display to the new zone and
the SmartSet
®
will remember that setting for you.
Date Display
To see the correct date at any time, depress the
MONTHE/DATE
button. The display changes from time to Month and Date (MM/DD).
For example, May 21
st
will appear “5.21”.
When you release the
MONTH/DATE button, the display will return to the correct time.
Year Display
To see the correct year, depress the
MONTH/DATE and TIME
buttons together.
The display changes from time to year.
When you release the
MONTH/DATE and TIME buttons the display returns to the correct time.
Day Of Week Display
Press the SNOOZE button to show day of week, for example, today
is Monday, the display will appear “d
1”. (“d” instead of “day of
week”, “1” instead of Monday.)
Daylight Saving and Leap Year Adjustments
All Daylight Saving and Leap Year adjustments are made automatically by the SmartSet
®
internal
computer as follows:
Start of Daylight Saving Time:
At “2:00 AM” on the 2nd Sunday in March, the clock will automatically advance to “3:00 AM”.
End of Daylight Saving Time:
At “3:00AM” on the 1st Sunday in November, the clock will automatically reset to “2:00 AM”.
Leap Year:
At “12:00 Midnight” on February 28th, the calendar display will change to “2.29”.
Manual Time Adjustments
Some people like to set their clocks 5 to 10 minutes fast to make sure that they will always be on
time. Even though the SmartSet
®
sets the time by itself, you still have the option of adjusting the
time manually if you wish.
To manually adjust the time display depress and hold the
TIME button, and press either the SET +
or
– button to adjust the time display ahead or back as desired.
Each press of the
SET + or – button will change the display by one minute. If you hold the SET +
or
User Manual For Emerson Clock Radio Er 100116 2
– buttons the display will continue to change. The display will change slowly at first, one minute
at a time. But if you continue holding the
SET + or – buttons the display will change rapidly.
NOTE: If you manually adjust the time, your new setting is entered into the SmartSet
®
memory. If
the power is interrupted, the display will return to your new setting, not the original setting, when
the power is restored.
Adjusting The Wake Up Times
Your SmartSet
®
clock radio has two separate alarms that can be set and used independently. You
may use the alarms to wake two people at different times, or you may use one alarm for weekdays
and the other for weekend wake up times. The procedure for adjusting the wake up time is the
same for both Alarm 1 and Alarm 2.
1. Press and hold either the
ALARM 1 or ALARM 2 setting button.
The display will change from the correct time to the Alarm 1 or
Alarm 2 wake up time.
2. While holding the
ALARM 1 or ALARM 2 setting button, depress either the SET + or – button
to move the display ahead or back to your desired wake up time.
3. When the desired wake up time appears on the display, release the
SET+ or – button.
NOTE: Be sure that you have set the wake up time correctly by observing the AM indicator. If
the
AM indicator is ‘On’, the wake up time is “AM”. If the AM indicator is ‘off’, the wake up time
is “PM”.
4. When the desired wake up time (AM or PM) appears on the display, release the
ALARM 1 or
ALARM 2 setting buttons.
1
3
2
4
5
7
6