PERFECT – Perfect Speed, EMC Motor and User Interface; Whether you need a motor for your new OEM design or an aftermarket replacement, the U.S. MOTORS® product line offers a full complement of ECM/BPM and induction products designed for single or three phase applications.
4
PerfectSpeed
®
User Interface Box
The PerfectSpeed
®
operates in speed mode when connected to the pump. You can
adjust the demand of the motor manually using the PerfectSpeed® User Interface.
The motor inf
ormation displayed in the User Interface is outlined in Table 1. If the
motor encounters
a problem, the User Interface displays a corresponding error code.
These are outlined in Table 1 as well.
Table 1 – User Interface Display Information
Control Mode
Data Displayed
Speed (speed feedback)
Spd – followed by the instantaneous speed in RPM
dE
– followed by S + demand in %
Error Codes
E1 – No communications
E2 – Under V
oltage
E4 – Non-NMC Motor
Minimum and Maximum Operating Parameters
The PerfectSpeed
®
motor operates properly within minimum and maximum
parameters.
Your settings must be within these ranges.
PerfectSpeed
®
Perfect Speed User Interface
NEMA 48 Pump Motor
PerfectSpeed
®
Motor and User Interface
If the PerfectSpeed
®
motor with User Interface isn’t running, perform the following
checks:
Motor Is Not Running
The Nintendo Wi-Fi Connection service, which provides certain online functionality for many Wii, Nintendo DS, and Nintendo DSi software titles, was discontinued on 5/20/14. https://coastallucky.netlify.app/japanese-wii-safety-manual-pdf-download.html. Wii Operations Manual Channels and Settings PRINTED IN CHINA NINTENDO OF AMERICA INC. BOX 957, REDMOND, WA U.S.A. 62994L RVL-S-GL-USZ NEED HELP WITH INSTALLATION.
1. Ensure that both the PerfectSpeed
®
motor and User Interface have proper line
voltage for intended application.
2. Turn the User Interface on-board potentiometer fully clockwise (100% demand)
and check to see if the motor runs.
3. If 0-10 VDC input is in use, disconnect the external input from the User Interface
and perform
Check 2.
4. Check the digital read-out of User Interface for an error code:
Table 5– User Interface Error Codes
Reloading is a complex craft that's intimidating to many shooters, but the pay-off is huge; finely tuned ammunition that fits your exact needs. The compound leverage system of the Rock Chucker Supreme Press can full-length resize cases with less effort than other presses neck size. Using RCBS Case Forming Dies this press will form.30-06 cases into many other calibers. The Rock Chucker Supreme press ram accepts removable type shell holders. To install, insert. The shell holder into the ram and twist slightly to the left. To remove, twist slightly to the right. See photo #4. To use the primer arm, first make sure. ROCK CHUCKER SUPREME PRESS P R O D U C T I N S T R U C T I O N S. SAFETY Reloading is an enjoyable and rewarding hobby that can be conducted safely. But carelessness or negligence can make reloading hazardous. This product has been designed from the beginning with the user’s safety in mind. When reloading, some safety rules must be. Rcbs rock chucker supreme user manual.
Error Code
Reason
Action
E1
No Communication
Remove power from both the
PerfectSpeed
®
motor and User
Interface for four (4) minutes,
then reconnect power and test
again.
Check the communication cable
conf- nection between the
PerfectSpeed
®
motor and User
Interface.
Check the continuity of
communica
Us Motors Perfect Speed User Interface Manual Free
tion cable (pin 1-1, pin
2-2 pin 3-4, and pin 4 3).
E2
Low V
oltage
This is a reading from the
PerfectSpeed
®
motor itself. Ensure
Us Motors Perfectspeed User Interface
that there is at least 71
Perfect Speed Pc Optimizer Aol
VAC (for 115
VAC applications) or 142 VAC (for
230
VAC applications).
E4
Not a NMC Motor
Connect to
a NMC motor.
9